1 5

Banks Dual Heater Upgrade Kit

Banks Dual Heater Upgrade Kit

42830

$138.00 USD
$138.00 USD
Sale Sold out
Shipping calculated at checkout.

🔒 Secure checkout with:

Visa Mastercard Discover PayPal Shopify Secure

SSL Encrypted • Fast Shipping • Easy Returns

🔔 Important Notice: This product may be temporarily out of stock. Orders are still accepted, but please note that additional processing time may be required before shipping. Estimated lead time may vary depending on supplier availability. If you need the item urgently, please contact us to confirm current availability.


Includes 750-watt high-performance coil heater, copper washer, and cable.

Increases Monster-Ram to 1500 watts total heat output

About This Product

Add the Banks 750 Watt Heater Upgrade Kit to your Monster-Ram for cold-weather starts as low as -30°F/-34°C with block heat and -20°F/-29°C without block heat.

Built To Survive

This simple bolt-on kit requires no maintenance. Unlike the factory Cummins grid heater, which can fail and destroy your engine, Banks coil heaters are designed to fail safely, avoiding catastrophic engine damage.
Dual heat upgrade for the Banks Monster Ram Installed

How It Works

Doubles your Banks Monster-Ram's heat output from 750 watts to 1500 watts.
Inside view of dual heaters installed

Cold Weather Starting Recommendations

The Banks Dual-Heat Upgrade Kit is designed around RAM’s block heating recommendations.

RAM recommends the use of a block heater at 0°F/-17°C and mandates its use at -20°F/-29°C. Failure to follow these instructions could lead to premature wear and/or failure of key components, including pistons, rings, and cylinder walls.

Test Criteria

We followed RAM's cold start recommendations. Per the owner’s manual, RAM recommends the use of the block heater when the temperature drops below 0°F/-17°C and mandates the block heater at temperatures below -20°F/-29°C.

Using a controlled climate chamber, our first test utilized block heat and two Banks coil heaters (1500 watts total). The Monster-Ram enabled our test truck to cold start down to -30°F/-34°C. Against RAM’s recommendations, we also attempted to cold start with the same two coil heaters and no block heat. We were able to cold start down to -20°F/-29°C. 

All tests were performed with two intake air pre-heat cycles per the owner’s manual. Intake air temperature is just one factor contributing to a successful cold start. Individual results may vary. Testing is ongoing with a detailed video forthcoming.

Test Vehicle Configuration

  • 2024 Ram 2500 4x4 Tradesman, dual cab short bed
  • Mileage 7,8XX
  • Vehicle unmodified apart from Monster-Ram
  • Minimum 12-hour cold soak at specified temperature
  • #1 Diesel fuel
  • AMSOIL Signature Series 5W40 motor oil
  • New Interstate AGM batteries with full state of charge
  • New MOPAR fuel filter
  • New MOPAR fuel/water separator
  • New MOPAR air filter

About This Product

Add the Banks 750 Watt Heat Upgrade Kit to your Dual-Heat Capable Monster-Ram for a total of 1500 watts of starting heat. Aids severe cold-weather starts.

Fitment Note
Double the heat output. Includes 750-watt high-performance coil heater, copper washer, and cable.
Key Features
Installs in minutes
Includes
  • 750 Watt Coil Heater
  • Copper Washer
  • Heater Coil Extension Wire


View full details

📌 Before You Complete Your Purchase Please review the important information below regarding product accuracy, pricing, inventory, and return policies.

  • Terms & Conditions (TOS)

    Product Information Accuracy Disclaimer:

    "While we strive for accuracy, FrankBuilt Performance does not warrant that product descriptions, prices, or other content is error-free. In the event of an error, we reserve the right to cancel or correct any order placed for the incorrectly listed item."

    Price Changes:

    "Prices are subject to change without notice. Errors in pricing may occur and we reserve the right to refuse or cancel orders placed at incorrect prices."

    Inventory Disclaimer:

    "Inventory availability is not guaranteed. If an item becomes unavailable after an order is placed, we will contact you as soon as possible to offer alternatives or a full refund."

  • Shipping & Returns Policy

    Wrong Parts Received / Ordered:

    "It is the customer’s responsibility to verify product fitment before placing an order. If you receive the wrong item due to an error in our listing, we will work to resolve the issue. If the wrong item is ordered by mistake, restocking fees may apply."

    Restocking Fees and Return Eligibility:

    "Returns may be subject to a restocking fee. Items must be unused and in original packaging."
Contact Us