Randy's Transmission BabyMaker1000 68RFE BILLET Valve Body KIT w/ Filters & Deep Pan 07.5-18 Cummins
Randy's Transmission BabyMaker1000 68RFE BILLET Valve Body KIT w/ Filters & Deep Pan 07.5-18 Cummins
SKU:
Couldn't load pickup availability
šĀ Important Notice: This product may be temporarily out of stock. Orders are still accepted, but please note that additional processing time may be required before shipping. Estimated lead time may vary depending on supplier availability. If you need the item urgently, please contact us to confirm current availability.
This is the SAME valve body we use in ALL our 68RFE transmissions!
This package includes:
-Cast deep transmission pan w/ gasket ( Georend, MagHytec, PPE )
-Filter kit with both screw on & press in filters}
-Billet screw on adapter for filter
-BabyMaker1000 Valve Body
Eliminate cross leaks, increase line / holding pressure, and have better peace of mind!
The valve body is flat sanded to exact tolerances. Randy's installs HD billet accumulators proven to prevent bore wear andĀ provides unsurpassed sealing qualities. Sonnax accumulator plate cover with 3 additional boltsĀ eliminating plate blowout. SSV is reamed out and Transgo switch valves are installed to correct wear and leaks. All valve body bores are vacuum tested to insure hydraulic integrity. HD billet channel plate is installed ontoĀ the valve body and torqued to our specifications preventing cross leaks which results in premature transmission failure.
Includes new O.E solenoid block.
THIS WILL NOT FIX A TRANSMISSION WITH RATIO CODES. IF YOU'RE EXPERIENCING THIS ISSUE, THE TRANSMISSION IS HURT.Ā
Will Fit With OE Transmission Pan
To unlock the full potential of the Babymaker, it requires trans tuning.Ā
If you do not have tuning, this will, at minimum eliminate cross leaks. You MUST email us if you do not plan to tune your truck to get additional information!!!
THIS IS THE INFORMATION YOUR TUNER WILL NEED TO PROPERLY TUNE FOR THE BABYMAKER:
-LINE PRESSURE SET TO 225PSI ABOVE 30% THROTTLE ANGLE
-100PSI RESTING PRESSURE
-NO LOCKUP UNTIL 4TH GEAR
-LOW/REVERSE SPRAG HOLDOUT
Ā
Core charge is fully refunded upon receipt of complete, rebuildable core valve body assembly.
Ā
Ā
Ā
Ā
Share
šØ Las Vegas Customers!
If you're located in Las Vegas and need professional installation for this part, check out our trusted installer:
Sin City Diesel & Offroad
Your local go-to shop for diesel performance and expert installs.
š Before You Complete Your Purchase Please review the important information below regarding product accuracy, pricing, inventory, and return policies.
-
Terms & Conditions (TOS)
Product Information Accuracy Disclaimer:
"While we strive for accuracy, FrankBuilt Performance does not warrant that product descriptions, prices, or other content is error-free. In the event of an error, we reserve the right to cancel or correct any order placed for the incorrectly listed item."
Price Changes:
"Prices are subject to change without notice. Errors in pricing may occur and we reserve the right to refuse or cancel orders placed at incorrect prices."
Inventory Disclaimer:
"Inventory availability is not guaranteed. If an item becomes unavailable after an order is placed, we will contact you as soon as possible to offer alternatives or a full refund."
-
Shipping & Returns Policy
Wrong Parts Received / Ordered:
"It is the customerās responsibility to verify product fitment before placing an order. If you receive the wrong item due to an error in our listing, we will work to resolve the issue. If the wrong item is ordered by mistake, restocking fees may apply."
Restocking Fees and Return Eligibility:
"Returns may be subject to a restocking fee. Items must be unused and in original packaging."