Randy's Transmissions BabyMaker2000 Kit w/ Deep Pan & Filters 2019+ Cummins

This is the SAME valve body we use in ALL our 2019+ 68RFE transmissions!

The Randy's Transmissions BabyMaker2000 Kit includes features such as flat sanded valve body, HD billet accumulators for bore wear prevention, and a Sonnax accumulator plate cover with additional bolts for plate blowout prevention. With a reamed out SSV and installed Transgo switch valves, leaks and wear are corrected. Each valve body is vacuum tested for hydraulic integrity and includes a new O.E solenoid block. Upgrade to prevent cross leaks and premature transmission failure. All valve bodies are dyno tested to ensure perfect operation!

This complete package includes:

-BabyMaker200 valve body
-Cast Deep pan ( Goerend, MagHytec, PPE )
-Screw in & press in filters
-Billet screw adapter for screw in filter

THIS WILL NOT FIX A TRANSMISSION WITH RATIO CODES. IF YOU'RE EXPERIENCING THIS ISSUE, THE TRANSMISSION IS HURT. 

THIS IS THE INFORMATION YOUR TUNER WILL NEED TO PROPERLY TUNE FOR THE BABYMAKER:

-LINE PRESSURE SET TO 225PSI ABOVE 30% THROTTLE ANGLE
-100PSI RESTING PRESSURE
-NO LOCKUP UNTIL 4TH GEAR
-LOW/REVERSE SPRAG HOLDOUT
-UNDERDRIVE PULSE TEST MUST BE TURNED OFF.

To unlock the full potential of the Babymaker, it requires trans tuning.

If you do not have tuning, this will, at minimum eliminate cross leaks. You MUST email us if you do NOT have transmission tuning to ensure you get the proper valve body! 

We also offer the BabyMaker2000 Plan B kit that is totally TUNELESS!

Core charge is fully refunded upon receipt of complete, rebuildable core valve body assembly.